Whether you are doing woodwork or some metalwork projects, accuracy should be at the top of your priority list. The more accurate you are on your work, the faster you will complete your project. All this cannot be possible without the help of the best bench vise for the money.
Bench vises help in stabilizing the materials that you are working on. For accurate cuts, you need the material to be as stable as a hydrogen atom (maybe that is not the best comparison but at least it does drive the point through).
Apart from accuracy, you also get the work done at a faster rate since you do not have to replace the material every time it gets out of line.
With the wide variety of bench vises out there, it may be a difficult task to find the perfect one, so we have compiled the 3 top rated bench vise to help you settle for the best:
Top 3 Best Workbench Vise
Yost Vises 465 6.5″ Combination Pipe and Bench Vise.
Why is it a top pick?
This one of a kind clamp can support pipes of up to 2.5” in diameter. The lowest diameter it can hold properly is about 0.125”, giving you a wide range of pipes to work on with the clamps.
Unlike most clamps. The mouth of the clamp is super thick, giving you a good grip on anything that you place on the vise, qualifying it to be the best bench vise for the money.
There are lots of other bench vises that you could purchase in the current market, but the reason this is the best product to go for, is that it also has a joint at the base that can rotate at a 3600 angle.
This kind of rotation allows you to work with any type of shape within the grasp of the clamp. Whether you are working with a straight plank or something that is totally curve to a circular shape, the vise will hold it steady for you to have accurate measurements in it.
The cast iron material used to produce a U-shaped vise makes this a durable product to purchase. You can be sure that the vise is as strong as you need it to be because it has the strongest material for metal works as one of its components.
Another feature that qualifies the Yost vise as one of the best bench vise in the market, is its replaceable top jaws. The moment that the jaws fail to hold tightly the material that you are working on does not necessarily mean that the whole product is done for.
You can tune the jaws to become tighter than ever before with ease. And to make the grip even tighter, the jaws have rubber fittings. The rubber prevents the materials from sliding out of place while you are working on them.
Fixing the vise on a bench requires more effort than usual. Most of the users complain that the bench vise had a bigger pivot than the bolts that were provided. They had to apply some of their engineering skills to make the Yost vise to hold on tight to the bench.
Turn, rotate and tilt your material to the perfect angle for you to work on with this amazing tool.
The PanaVise bench vise is capable of giving you more than a two dimensional angle to work on.
You can now work on a hemispherical boundary that allows you to work on a huge array of shapes that you could not possibly complete with a mere vise design, making it one of the best bench vise for the money.
The top and bottom of the vise which is made of die cast zinc are connected with a PanaVise patented ball joint. The joint is so steady when tightened that you can do pull ups on the vise without falling off.
Adjusting the ball joint to your preferred angle is a simple task. You just have to tighten the grip on the material and voila; the most accurate angle you can ever get with a vise.
The vise is fitted with nylon jaws that insulate the vise from electricity when you are working with electric components. The nylon jaws also secure the material you are working on tightly without motion.
If that has not caught your attention yet, the ease of fitting the base will surely make you see that this is the best workbench vise that you can get. You can fit the base on any universal workbench with 6.5” bolts to tighten the grip.
The metallic finish to the design of the bench vise adds a touch of class to it.
Unlike the old fashioned bench vises that has that same old iron-cast look as if they were made in the 80’s this bench vise will upgrade the looks of your workshop to something a little bit more futuristic and neat.
You also get a limited lifetime warranty for the Yost vise just to reassure you that it is going to serve you for quite a good period of time.
To have a tight lock on the ball head, you have to put in a little more effort than usual. The ball head needs more than the usual force to keep it from rotating hence you cannot work on anything until you have had an extremely tight lock on the ball head, which will reduce the lifetime of the vise.
You May Also like: Best Ratchet Set Review
Wilton 11800 648HD Utility Workshop Vise – Best Workbench Vise.
This masterpiece can hold pipes of up to three inches in diameter. The hold on the pipes is increased by the serrated edges on the arms. This will ensure that you make the most accurate cuts ever.
The Wilton workshop vise has a throat depth of 4”. This can give way for some more room to pipes that are a bit larger than the maximum pipe diameter indication.
The throat depth also allows support of wide materials being held by the jaws. It will give the vise room to hold more than half of the material tightly inside making the whole of it to be more stable.
Those are not the only features that make this a good bench vise to use in your workshop; the vise only weighs one pound. This makes it perfect for portable workshops and home calls.
You can easily transport the vise to anywhere you want to work without breaking a sweat because of its super light nature.
To top off all the goodness associated with Wilton 11800 648HD Utility Workshop Vise, you get a limited lifetime warranty. The warranty should be a guarantee to you that you are going to use the product over a really great duration of time.
If the vise ever falls to pieces within the warranty period and you were using it properly, you will be free to return it to the manufacturer for a replacement.
This bench vise has received a lot of good ratings in bench vise reviews for the tight grip that it has on the materials being worked on. The jaws have a really tight grip and hence allow you to have a completely accurate work session.
Most of the users have stated that the T-bar on the vise has a heavier nature than its looks. The T-bar has ended up pinching them during use and mounting and have cautioned against careless installation of the vise.
Best Bench Vise For The Money Buying Guide.
If getting the perfect vise for your workshop has proved to be a pain in the neck, then here are some few aspects of a vise that you can look for before you consider one to be the best bench vise for the money:
Reinforced jaws: the jaws are the features that determine the grip that will be on the materials being worked on.
The best vise should have jaws made from materials other than metal that are capable of holding the material in place tightly. One of these jaw reinforcements can be rubber.
Angular rotation: The vise should allow you to work at ease at any angle you wish. This will help you with the materials that need super accurate cuts.
Base support: without a good base support you will end up using more effort to maintain an accurate measurement.
The vise you are planning on purchasing should have a really good base support. The base should be able to be screwed to the bench by bolts that are available I the local market.
Strong anvil: if a strong anvil is included in the vises’ features, then that vise has a great advantage over the others. You should go for that one since it is going to provide a work surface for you to strike the materials on without breaking anything.
The best bench vise for the money should not only be capable of holding materials tightly on the bench, but should also be able to provide a strong surface for you to work on among other things. Get to discover the best and most reliable bench vises in the market by reading through this article.